Cooling Water Tower
Oil Storage Tank, Temporary Storage Tank, Heat Preservation Tank, Cooling Barrel, Oil-proof Curing Barrel
TsungHsing Food Machinery is a cooling water tower machine manufacturer and supplier. It provides storage tanks for oil storage, heat preservation and cooling functions.
Main Function:
1. The frying oil is temporarily stored to facilitate the cleaning and maintenance of the fryer.
2. Extend the oil life by quickly cooling and cooling the hot oil after frying to shorten the operator's staff.
3. Prevent the frying oil in the bucket from solidifying and agglomerating, so that the frying oil is not fluid or clogged.
4. There is a coil heat exchange cycle tube inside the storage tank. When the frying oil needs to be cooled down quickly, the cooling water is connected inside the coil, and the hot-frying oil can be cooled rapidly.
5. As it is necessary to prevent the frying oil from solidifying and clogging, connect hot water to the coil to keep the frying oil liquefied.
6. It’s convenient to clean and maintain the discharge inside by installing a clean drain at the bottom of the barrel.
7. Set “emergency stop button” to stop operation when there is any abnormality.
Detailed Description
1. In order to match the oil capacity of our company's fryers, we have cooling water towers with different specifications of oil capacity. For example, 1 ton, 1.3 tons, 1.5 tons, 2 tons, etc.; or can be customized according to customer requirements.
2. Rapidly cooling the storage oil; After the frying, the hot frying oil needs to be cleaned for maintenance. Before pumping the hot oil to the cooling water tower, it is necessary to start the cooling water tower circulation. The connecting pipe must use the metal pipe, and the hot water will return to the hot water. After the cooling water starts the cycle, the hot oil is pumped into the cooling water tower. The hot oil is heat exchanged in the tower through the cooling water coil to rapidly cool the hot oil. This can shorten the "acid price" and increase not only the service life of the frying oil but also the operating efficiency.
3. Prevents the oil stored in the cooling water tower from solidification; The hot water pipe is stored on the side of the cooling water tower, heated by an electric heating pipe at the bottom of the cooling water tower and then the hot water is circulated to the heat exchange coil in the tower. Indirect water insulation will heat the cold oil to about 30 ~ 40 °C to prevent the solidification of the frying oil.
Capacity
- 1 ton, 1.3 tons, 1.5 tons, 2 tons.
Features
- The whole tower uses food-grade stainless steel.
- The general cooling water tower is used to prevent the oil from solidifying. The electric heating tube is directly inserted into the oil and directly heated. This is not in line with food hygiene, and is strictly prohibited in European and American countries. Oil quality is prone to "acid price", which causes deterioration and precipitation of carcinogens.
- The cooling water tower of TSHS uses hot water and water heating method, which is in line with food hygiene. When the oil is stored, there is no problem that the "acid price" is deteriorated and the carcinogen is precipitated.
- Water temperature can be set to constant temperature automatic control by using hot water insulation method.
- When the oil is discharged, there has the pump to pump the oil to the place where it is needed. Such as back to the fryer or other tanks.
Flow Chart
Oil Clearance Before Fry Cleaning→ Fine Filter → Cooling Water Tower → Oil Back to Fryer
Product Features
- The vertical hot water heating water storage pipe on the side of the cooling water tower is equipped with a water level display, which makes it easy to check the water level. Regularly replenish and replace circulating water to prevent scale formation and affect heat exchange efficiency.
- It’s easy to check the oil level by equipped with an oil level display.
- Set the bucket cleaning time according to the industry. The oil in the barrel needs to be emptied before the oil storage tank is cleaned. It can also be washed with alkaline water while washing the fryer.
- After accumulating for a long time, the sediment sludge and residual oil at the bottom of the cooling water tower are emptied and discharged by the bottom discharge valve.
- When the oil tank is cleaning, opening the "cleaning manhole cover" above the tank, pay attention! You need to wear high-level personal safety gear to prevent falling danger.
- The bottom slag can be cleaned by a high-pressure water washing machine at the "cleaning manhole".
- Reuse the high pressure air to remove the residual water.
- Check that all valves are open or closed. Be sure to be safe.
- If the oil storage tank is not used for a long time, it is recommended that the connecting pipeline be cleaned and the oil storage tank should be cleaned before being placed. Otherwise, the oil sludge at the bottom of the bucket may agglomerate, which may cause the difficulty of cleaning. Circulating hot water needs to be vented to prevent fouling.
Equipment Information Of Related Product
- 1 ton, 1.3 tons, 1.5 tons, 2 tons.
- Different planning and design according to the customer's requirements is available after the further contacting with our company personnel.
Acessories
Circulating Hot Water Pump, Oil Pump, Electric Heater.
Applications
- Cooling water tower of Palm Oil or Animal Oil, Anti-storage Curing.
Performance Comparison
1. The general cooling water tower is used to prevent the oil from solidifying. The electric heating tube is directly inserted into the oil and directly heated. This is not in line with food hygiene, and is strictly prohibited in European and American countries. Oil quality is prone to "acid price", which causes deterioration and precipitation of carcinogens.
2. The cooling water tower of TSHS uses hot water and water heating method, which is in line with food hygiene. When the oil is stored, there is no problem that the "acid price" is deteriorated and the carcinogen is precipitated.
3. The hot water circulation pipe enters and exits, and the external pipe port is reserved, and the cooling water tower can be externally connected. When the hot oil is blown into the cooling water tower, the hot oil can be rapidly cooled. Save oil cooling time and increase the life of the oil.
- Related Products
Vibration Feeder
TsungHsing Food Machinery is a vibration feeder machine manufacturer and supplier. TsungHsing...
DetailsCentrifugal De-oiling Machine
TsungHsing Food Machinery is a continuous de-fatting machine manufacturer and supplier. Centrifugal...
DetailsContinuous Fine Filter
TsungHsing Food Machinery is a Continuous Fine Filter machine manufacturer and supplier. TsungHsing...
Details- Product catalog Download
FRYIN-201 Small-size Continuous Fryer
Enter the continuous production market at an affordable price. The "small volume, space-saving" FRYIN-201 fryer. Suitable for small food industry, central kitchens, restaurants, food stores, schools, etc.
Over 50 Years of Cooling Water Tower Supply | TSHS
Based in Taiwan, since 1965, TSUNG HSING FOOD MACHINERY CO., LTD. is a Cooling Water Tower supplier in snack foods industry.
500 food processing production lines sold in 65 countries, TSHS is a food machine expert with over 58 years of experiences. CE certified, reasonably priced food processing machinery are industrial fryers, oil heating systems, seasoning tumblers, liquid mixer machines, liquid sprayer machines, etc.
TSHS has been offering customers high-quality food processing machines for green peas, nuts, potato chips, grain puffs and corn puffs, with total snack foods solutions. They represent trust, specialty, high-quality and safety specialization, which is where their name TSHS came from.